Product overview
500 L Stainless Steel Cylinder for Heat Pumps – PAWT-500
The ECO-TEC PAWT-500LE1 is a 500 L stainless-steel domestic-hot-water cylinder designed for integration with a heat-pump heating system. The product range includes 200, 300 and 500 L capacities, allowing the installer to select storage volume according to the expected hot-water demand, space available and heat-pump output.
Features and operation
According to the published technical data, the inner vessel is made from Duplex 2205 stainless steel, while the heat-exchanger coil is specified as SUS316L stainless steel. The cylinder uses polyurethane foam insulation to limit standby heat losses. The outside casing is listed as galvanized steel with a white finish.
The specification includes an electric immersion heater of 3 kW with a thermostat and a G1 1/2-inch connection. Its use and control must be coordinated with the heat pump, electrical installation and required hot-water temperature. The cylinder is intended for domestic hot water storage, with the relevant operating-pressure and hydraulic limits given in the model table.
Planning and selection
The comparison table lists all three PAWT models. Use the PAWT-500LE1 column for the correct tank diameter, height, insulation thickness, weight and coil surface area. A larger store is not automatically better: storage volume should be matched to simultaneous hot-water demand, reheating capacity and the building layout.
Before installation, confirm access for handling the cylinder, clearances, connection sizes, water quality, expansion and safety devices, and the applicable requirements for drinking-water systems. The technical dimensions and pressures below are transcribed from the published technical table; their units are preserved as supplied.
Technical specifications
The table retains model values and units from the original product listing. Values apply at the specified test conditions.
| Characteristic | PAWT-200LE1 | PAWT-300LE1 | PAWT-500LE1 |
|---|---|---|---|
| Tank capacity | 200L | 300L | 500L |
| Outer tank diameter | Ø560mm (+/- 5mm) | Ø600mm (+/- 5mm) | Ø700mm (+/- 5mm) |
| Inner tank diameter | Ø470mm (+/- 5mm) | Ø500mm (+/- 5mm) | Ø600mm (+/- 5mm) |
| Height | 1312mm | 1572mm | 1822mm |
| Inner tank material | Duplex 2205 stainless steel | Duplex 2205 stainless steel | Duplex 2205 stainless steel |
| Inner tank thickness | 1mm (+/- 0.16mm) | 1mm (+/- 0.16mm) | 1mm (+/- 0.16mm) |
| Operating pressure | 6 bar (0.6 MPa) | 6 bar (0.6 MPa) | 6 bar (0.6 MPa) |
| Outer tank material | Galvanized steel, white finish | Galvanized steel, white finish | Galvanized steel, white finish |
| Electric heater type | G1 1/2", 3kW electric heater with thermostat | G1 1/2", 3kW electric heater with thermostat | G1 1/2", 3kW electric heater with thermostat |
| Insulation | Polyurethane foam | Polyurethane foam | Polyurethane foam |
| Insulation thickness | 45mm (+/- 2mm) | 50mm (+/- 2mm) | 50mm (+/- 2mm) |
| Insulation density | 40kg/m² (+/- 2) | 40kg/m² (+/- 2) | 40kg/m² (+/- 2) |
| Weight | 45kg | 65kg | 96kg |
| Heat exchanger material | SUS316L stainless steel | SUS316L stainless steel | SUS316L stainless steel |
| Heat exchanger dimensions | Ø28mm x 20m | Ø28mm x 25m | Ø28mm x 30m |
| Heat exchanger surface area | 2.6m² | 3.2m² | 4.1m² |
| Packaging dimensions | 630mm x 630mm x 1400mm | 670mm x 670mm x 1650mm | 768mm x 768mm x 1940mm |
For final specification and installation, use the current product datasheet, check compatibility with the actual system, and follow the manufacturer’s installation instructions.


