Product overview
Swimming Pool Heat Pump 28 kW – PECP280
The ECO-TEC PECP280-SAY is an R32 full-inverter heat pump designed to heat swimming-pool water. The published product information identifies this model as a 28 kW class unit. Its actual heating capacity and electrical consumption depend on outdoor temperature, pool-water temperature and the test conditions stated in the technical table.
Features and operation
The variable-speed compressor adapts output to changing pool demand. Wi-Fi functionality enables remote temperature adjustment and monitoring using a compatible mobile device. A PVC/titanium heat exchanger is specified for pool-water compatibility and corrosion resistance; hydraulic and water-quality conditions must still comply with the equipment documentation.
The original listing describes operation in outdoor temperatures from -7°C to +43°C and pool-water temperatures from +9°C to +40°C. It is not appropriate to assume the nominal heating output at every point within those ranges. The table presents heating capacity, input power and COP at defined air conditions; compare only values measured under the same conditions.
Planning and selection
For pool sizing, consider pool volume, surface area, cover, heat losses, desired heating time, ambient conditions and water circulation. Installation requires an appropriate filtration circuit, water connections and electrical supply. Inverter operation and the specified fan design are intended to limit unnecessary noise when the required output is low.
Use the technical table below for the exact model. Published COP values describe particular operating points and do not constitute a certified seasonal heating SCOP for building heating applications.
Technical specifications
The table retains model values and units from the original product listing. Values apply at the specified test conditions.
| UNIT | PECP280-SAY | |
|---|---|---|
| Rated heating capacity | (27 °C/24,3 °C) | kW | 10,30 ~ 28,00 |
| Btu/h | 35140-95530 | |
| Rated heating input | kW | 0,820-4,490 |
| COP | 12,56-6,24 | |
| Rated heating capacity | (15 °C/12 °C) | kW | 7,850-21,00 |
| Btu/h | 26780-71650 | |
| Rated heating input | kW | 1,080-4,320 |
| COP | 7,27-4,86 | |
| Power supply | 380-415 V/3N~/50 Hz | |
| Number of compressors | 1 | |
| Compressor | Rotativ | |
| Number of fans | 1 | |
| Fan speed | RPM | 600 – 700 |
| Noise level | dB(A) | 47-55 |
| Water connection | mm | 50 |
| Water flow rate | m3/h | 12,0 |
| Maximum water-side pressure drop | kPa | 17,0 |
| Net unit dimensions (L/W/H) | mm | Consultați desenele unităților |
| Unit shipping dimensions | (L/W/H) | | mm | | A se vedea eticheta de pe ambalaj |
| Net weight | kg | a se vedea plăcuța de identificare |
| Shipping weight | kg | a se vedea eticheta de pe ambalaj |
For specification and commissioning, consult the current product datasheet and installation instructions. Seasonal SCOP is not derived or published from isolated COP values.




